This post was copied from this website
D700/D3, How to program a Button to do Handheld HDR
Just discovered how to do this easily ... so, I wanted to share it here.
Even after more than a year ... still finding easier ways to do things. lol
Just discovered how to do this easily ... so, I wanted to share it here.
Even after more than a year ... still finding easier ways to do things. lol
I am not sure why it was so hard to find some instructions on how to do this.
fyi I even emailed Nikon, and on there Service site they told me it could not be done (they probably did not understand what I wanted to do)
imho, programs like PS CS5 combined with LR v3.3 is making it easier to create HDR images.
So, now what you need is your camera (in my case a Nikon D700) to be able to fire off at least three exposures ... EV0, EV-2, EV+2 , a Normal exposure, a 2 stop under , and a 2 stop over file.
and to do it as Quickly and easily as possable. To eliminate as much movement while doing the shot.
The idea of doing it Handheld is to press one button and have it fire off the shots as quickly as possable.
Here's how it is done:
1) what I like to do is make sure to set the ISO value ... and make sure at "that ISO value" the -2 EV shot is not tooo slow of a shutter and is something I can handhold.
- I normally will use Aperture Priority and have the "Shutter value" change on the bracket.
So, selecting a ISO value is finding that balance of Noise and Shutter handhold ability.
2) Depending on how much time I have to set up the shot ... might lock my AF so the AF point does not change. but, most of the time I do not. imho, it's easy enough to make sure my AF point is over a subject that is big enough and will not move.
OK, now on setting up the D700/D3
3) Set ... Menu - e5 Auto Bracketing set - AE only
Basically set up to bracket exposure
4) Now to assign the Bracketing to the FUNC button ... on the D700 it would be the bottom button up front on the right.
Set .... Menu - f5 Assign FUNC. button - set "both" Func. buttons, * top FUNC. button press to BKT Bracketing burst .... and the * bottom FUNC. button + dials ro BKT Auto bracketing
5) I also like to set f1 switch to Both ... with allows me to turn the shutter switch to the right to both turn on the LCD light and to show INFO on the LCD.
OR you can simply look at the top LCD.
6) So, if you look at the Top LCD , AND then press the FUNC button .. you can roll the Back wheel to set How many Frames you will shoot on a Bracket (set to 5), and use the Front wheel to set the EV value (set to 1) , unfortunately Nikon only lets you bracket at 1 stop increments.
To end up with at least one file at EV-2 and one file EV+2 ... you actually need 5 shots at 1 EV increments.
So, set the Bracket at 5 frames at 1 EV increments ... this will give you "EV0" , EV-1 , "EV-2" , EV+1 , "EV+2" ... but, imho you need only the three files EV0, EV-2, EV+2 (I delete the other two)
7) this last step is not nessasary , BUT if you "don't" want to have to count off 5 shots , and have the camera STOP after 5 shots ... change the top/left dial to "S" Single shot.
Even at this setting , the Nikon D700 will fire off 5 frames at the Highest Rate possable ...
side note:
Someone discovered that if you e5 Auto bracketing set to flash only , and then have the PopUP flash DOWN, you will fire them faster , which is aprox. 6 frames per second , without a grip. Yes, this is faster than the 5fps that the D700 is suposed to do "without" a grip. Nice! a FW bug that works in your favor.
NOW ... if you followed me so far ...
ALL you need to do now ... when you are walking around ... and want to fire off 5 frames Bracketed:
- Half press to lock your AF , press & hold the FUNC button , then full shutter = The D700 will then fire off 5 frames at full speed and stop , Bracketed.
Now how coool is that !
p.s. After you are DONE shooting HDR, Don't forget to change back ... FUNC button 5 f (5 frames) to 0 ( zero frames ) on BKT.
Press the FUNC button and Back Wheel roll to 0.
What if you want to HDR bracket properly on a Tripod.
Well, you can add these fuctions ... (I ADD it to the MY Menu so I can find it fast).
- d9 Exposure Delay mode ... which delays the shutter until 1 second after the mirror is raised.
(just remember to turn this OFF after your HDR shot on a tripod)
- Interval timer shooting ... found on the shooting menu ... You can set this a 1 sec .. and 1x5 shots ( 1 set , 5 shots ) ... so, it will basically fire after you take your hand off it.
Hope this helps someone,
HG
